Estd. 1953•Mine Owner•Exporter

Sandstone Care and Maintenance: Cleaning, Sealing and Stain Removal

Simple, safe routines to keep natural sandstone looking good — everyday cleaning, when to seal, how to treat common stains and what products to avoid.

October 23, 20266 min readBy Arvind Garg, Managing Director & Stone Consultant
Clean Dholpur sandstone facade and paving

Key Takeaways

  • Everyday cleaning needs only water, a soft brush and mild neutral cleaner.
  • Sealing helps resist stains, especially around kitchens, pools and dining areas.
  • Avoid harsh acids and high-pressure jets held close to the surface.
  • Test any cleaner or sealer on a hidden spot first.

Natural sandstone is low-maintenance, but a little regular care keeps colour fresh and prevents stains from setting.

Everyday care

Sweep regularly and wash with clean water and a soft brush. For heavier dirt use a mild, pH-neutral stone cleaner. Rinse thoroughly so no residue is left behind.

When and how to seal

A penetrating (impregnating) sealer reduces water and oil absorption without forming a plastic-looking film. Clean and dry the stone first, apply evenly, wipe excess and allow full curing time before use.

Always test first

Try the sealer on a spare piece or hidden corner to check the finish and colour change.

Common stains

Act quickly: blot, don't rub.

Stain quick guide
StainWhat to do
Oil or greaseBlot, then use a stone-safe degreaser or poultice
Algae, mossSoft brush with neutral cleaner, rinse, improve drainage
Rust marksUse a rust remover made for natural stone
Food and drinkBlot immediately, wash with mild cleaner

What to avoid

A few habits cause most damage.

  • Strong acids and bleach
  • Wire brushes and close-range high-pressure jets
  • Leaving standing water on the surface
  • Skipping joint maintenance, which lets water in

Light, regular cleaning and sensible sealing keep sandstone beautiful for decades. For product advice for your stone and finish, ask the Dholpurstones.com team.

Frequently Asked Questions

How often should sandstone be sealed?

It depends on use and exposure. High-use and stain-prone areas benefit from periodic re-sealing; follow the sealer manufacturer's guidance.

Can I pressure-wash sandstone?

Gently and from a distance. Strong close-range jets can erode the surface and open joints.

How do I remove algae or moss?

Brush with a mild neutral cleaner and water, rinse well, and keep drainage clear so areas dry out.

Free Quote

Ready To Choose Your Stone?

Share your requirement and our team replies with samples and a quote.